以下是那封信,自己翻译的感觉关键部分不是很通,帮忙纠正下
Dear Frank;
We are analysing your drawing and we are finding a great problem;
According with the drawing SX4DL/406.0 the new grate cooler is less longer than the old drawings.
With the view B the width is more higher than the rotary cooler in the point of feeding,how can I feed the rotary cooler?.
I will prefer the lenght must be greater than the width,because in the actual stage I will not need any mechanical system for puting the clinker in the rotary cooler. DO NOT forget that the grate cooler and the rotary cooler are 90?refering to the kiln,and the drawing show it in line kiln-grate cooler and rotary cooler. YOU MUST CHANGE THIS!!!
Please,this is the last great thinking of this project.
About the Mr. Paul project, we are needing the certified drawing of the complemantary order!!!!
Regards,
Isidro.
以下是我的翻译
亲爱的frank:
我们在分析你的图纸时发现一个大问题。
根据图SX4DL/406.0 所示,新的篦冷机没有原图的长。
根据视图B,在输送点上(point of feeding给料口?)篦冷机的宽度比单冷机的要高?我怎么能给单冷机喂料?
我选择长度必须大于宽度,因为在运行时,我不再需要任何机械系统把熟料放入单冷机。不要忘记篦冷机和单冷机
根据窑(的尺寸)是90?,并且图纸显示它同时连接篦冷机和单冷机。你必须改变这一点(尺寸问题)。
这是这个项目最后一个大的设想。
关于保罗的项目,我们需要的 被鉴定的图纸的补充的步骤(order)