Chapter 3 Capture Card & Driver Installation
Step 1: Turn off your computer power before installing video capture cards.
Step 2: Install video capture cards in open PCI slots.
Step 3: Turn computer on and Insert the software CD in the CD-ROM drive.
Step 4: Windows will recognize the new hardware as shown.
Step 5: Windows will now prompt you to let it search for the device drivers.
This is the preferred method. Please click "Next".
Step 6: Windows XP will find the correct driver on your CD-ROM. (With other versions of Windows you may have to direct it to the folder that corresponds with your Operating System). Select the first driver and click "Next".
Step 7: Windows will then warn you that our driver has not passed Windows Logo Testing. Click "Continue Anyway".
Step 8: Click "Finish".
Step 9: If there is more than one card installed,repeat Step 5 to Step 8 until all drivers have been installed.
To make sure the Hardware Installation was completed properly, please check your Device Manager. You should find the correct number of Device Drivers listed under Sound, Video and Game Controllers before proceeding with Software Installation.
TIP: If Windows does not recognize one or more of your video capture cards, please do the following:
1. Clean the contacts of the video capture board with a clean pencil eraser to remove any residue.
2. If you are still having trouble, try another PCI slot.